A Cessna Citation business jet was instructed to abort landing at the San Diego International Airport Friday to avoid a plane that was still on the runway.
NTSB investigating Aug. 11 runway incursion and overflight at San Diego Int’l Airport that occurred when a Cessna 560X was cleared to land on Runway 27 and conflicted with a Southwest Airlines Boeing 737 which was in a line up & wait on Runway 27.
According to our information, the business jet came between 100 and 200 ft over the Southwest Airlines Boeing 737.
Preliminary review of the event showed that an air traffic controller instructed the pilot of a Cessna Citation business jet to discontinue landing because a Southwest Airlines Boeing 737 was still on the runway awaiting clearance to depart.
In the following statement, the FAA explained the situation further:
“The controller had previously cleared the Citation to land on Runway 27 and then instructed Southwest Flight 2493 to taxi onto that runway and wait for instructions to depart. The facility’s automated surface surveillance system alerted the controller about the developing situation.”
The FAA is sending a team of experts to the San Diego facility to investigate. Officials say the team will determine the closest proximity between the airplanes as part of the review.
